COMPREHENSIVE PROTECTION ARCHITECTURE
Our holistic approach integrates state-of-the-art detection, rapid suppression, and passive containment strategies to ensure maximum site survivability and regulatory compliance under ISO 14001 standards.
FIRE SUPPRESSION ENGINEERING
Advanced hydraulic systems and active suppression technologies. From complex sprinkler networks to high-pressure pump room installations, ensuring operational readiness and NFPA compliance.
System Architecture
Hydrant & Sprinkler Networks
Comprehensive architecture for wet and dry pipe systems. Designed to deliver rapid suppression through optimized pipe scheduling and nozzle distribution. Includes pre-action protocols for sensitive environments.
Design & Engineering
Hydraulic Calculations
Precise flow and pressure loss calculations ensuring terminal pressure requirements. Utilizing computer-aided modeling for complex loops.
-
Node-to-node analysis
-
Friction loss optimization
Compliance & Drafting
Full technical drafting services including isometric views and 3D clash detection. Strict adherence to National Building Code (NBC) and NFPA.
-
Regulatory approval support
-
As-built documentation
Testing Protocols
Hydro-Testing
Pressure Integrity Verification
Hydrostatic Pressure
System tested at 1.5x working pressure or 200 psi for 2 hours to ensure zero leakage.
Piping Flush
High-velocity flush to remove debris before nozzle installation.
Installation
Pump Room & Valve Stations
Turnkey installation of fire pump sets including Main Electric, Standby Diesel, and Jockey pumps. Features vibration isolation and precision grooved piping.
-
Configuration: Elec + Diesel + Jockey
-
Control: Auto Start / Manual Stop
-
Pump Head: Up to 150m
Periodic Maintenance
Maintenance Schedule
Structured Annual Maintenance Contracts (AMC) to ensure system reliability. Our service includes weekly run tests, quarterly detailed inspections, and annual performance certification.
Fire Pumps
Weekly
Diesel Engine
Weekly
Sprinkler Heads
Annual
Commissioning
Flow Verification
Performance Analysis
Flow Meter LPM Check
Verification of pump curves against design data. Analysis of pressure drops across zones and alarm valve functionality tests.
PASSIVE PROTECTION
Strategic compartmentalization, fire-stopping seals, and structural reinforcement to contain hazards.
Fire Rated Doors
Core Material Specifications
High-performance nylon pile brush integrated with intumescent material. Activates at 150°C, expanding 20:1 to seal gaps.
-
Cold smoke containment
-
Low friction coefficient
Intumescent Seals
Smoke Seals
High-performance nylon pile brush integrated with intumescent material. Activates at 150°C, expanding 20:1 to seal gaps.
-
Cold smoke containment
-
Low friction coefficient
Acoustic Seals
Dual-fin elastomeric polymer seals designed to dampen sound transmission while maintaining fire integrity.
-
Up to 45dB reduction
-
Antimicrobial coating
Maglocks
Fail-Safe Integration
Auto-release on Fire Alarm
Maglocks
(Surface)
Shear Locks
(Concealed)
Holding force up to 1200lbs. Instant release upon power cut.
Panic Hardware
Panic & Touch Bars
Engineered for immediate egress under pressure. Manufactured from Grade 304 or 316 Stainless Steel for maximum corrosion resistance and durability.
-
Material: SS 304 / 316
-
Cycle Test: 200,000 Cycles
-
Force: < 80N to open
Fire-Resistant Partitions
Structural Containment
Complete partition systems utilizing fire-rated gypsum board layers and intumescent-filled glazing channels. Critical focus on fire-stopping at all mechanical and electrical penetrations.
Gypsum Board Systems
Up to 120 mins
Fire Rated Glazing
EI30 / EI60
Penetration Seals
Mastic / Collar
Hydraulic Closers
Controlled Closing
EN 1154 Compliant
Overhead
Cam-action
Floor-spring
Heavy duty
Featuring adjustable closing speed, latching action, and backcheck to prevent door damage during wind loads.
FIRE DETECTION & ALARM PROTOCOLS
Advanced life safety architecture for critical infrastructure. Precision sensing, intelligent control, and rapid notification matrices designed for zero-failure environments.
Addressable Alarm Panels
Centralized processing units capable of pinpointing fire location to specific detector addresses. Supports looped redundancy for fail-safe operations.
-
Redundant CPU Architecture
-
Cloud Connectivity Module
High-Sensitivity Sampling
Aspirating smoke detection (ASD) systems that actively draw air through a pipe network for analysis, detecting combustion particles before visible smoke.
-
Laser-Based Analytics
Adaptive Thresholds
INTELLIGENT CONTROL PANELS
Addressable Loop Capacity
Up to 4 loops per panel, 250 devices/loop
Supports complex multi-floor zoning architectures.
Conventional Zone Support
Expandable 8-zone modules
Seamless integration for legacy system retrofits.
Network Integration
Fiber optic peer-to-peer, 64 nodes
Redundant token-ring topology with sub-second latency.
Backup Power Autonomy
72-hour standby + Alarm load
Dual redundant 24V DC supplies with smart charging.
ADVANCED SENSING TECHNOLOGY
Optical & Ionization Smoke
Dual-wavelength optical chambers minimize false alarms from steam while maintaining high sensitivity to combustion particles.
Sensitivity: 0.05% obs/ft
Thermal Detectors
Configurable as Rate-of-Rise (RoR) or Fixed Temperature points. Ideal for kitchens, garages, and boiler rooms.
Response: <30s @ 10°C/min
Multi-Sensor Criteria
Algorithms fuse thermal, optical, and CO inputs to confirm genuine fire events in sleeping areas and complex environments.
False Alarm Rejection: High
Aspirating Smoke Detection (ASD)
For mission-critical environments like server rooms and cleanrooms, standard point detection is insufficient. Our ASD systems utilize a network of sampling pipes to actively draw air into a high-sensitivity laser detection chamber.
Detects combustion products before visible smoke.
Class A, B, and C sensitivity settings.
Ultrasonic flow sensing for pipe blockage alerts.
Notification Appliances
110dB Sounders
32-tone selectable
Xenon Strobes
EN54-23 Compliant
PA/VA Integrated
Phased Evacuation
INTEGRATION & MAPPING
-
BMS Gateway Active
HVAC Trip
READY
Elevator Grounding
READY
Access Control
LINKED
Zone 4: Server Room B
Graphic Mimic Panel View
Our architecture supports BACnet and Modbus integration, allowing the fire alarm system to trigger HVAC shutdowns, release access control locks, and recall elevators. Real-time 3D graphic mimics pinpoint alarm locations instantly.
LOGIC & CAUSE/EFFECT MATRIX
// Emergency Response Matrix
IF INPUT: L2_Smoke_Detector_04 == ALARM
THEN OUTPUT: -> Activate_Strobes(Zone_2, Zone_3)
-> Start_Evac_Message(Language="EN", Floor=2)
-> Trigger_Relay(HVAC_Shutdown_L2)
-> Delay(3000ms) -> Close_Fire_Doors(L2)
{ }
Complex boolean logic allows for "Double Knock" scenarios (requiring two devices to activate before dumping gas suppression) and phased evacuation strategies to prevent stairwell congestion.
Enhance Fire Safety
Get in touch for engineered fire suppression solutions that protect lives, assets, and infrastructure.